Verified flooring case study • Berlin, CT • Completed August 2026

Walnut-Look LVP for a Tabletop Gaming Space

Prepare the concrete and create a finished wood-look floor for a future tabletop gaming and collectible-card retail space

Commercial Project · Commercial Space

936 sq. ft. gluedown luxury vinyl870 sq. ft. skim coatCommercial installation
Engagement
Commercial Project · Commercial Space
Installed area
936 square feet
Completed
August 2026

The problem

Can a new wood-look floor go down on concrete with leftover adhesive?

The old carpet was already gone before the crew arrived, but the concrete still carried the carpet adhesive across about 870 square feet. Gluedown LVP bonds directly to the slab — it has no underlayment to mask what's underneath — so any residue left on the concrete will telegraph through the new floor.

The preparation was methodical: scrape the adhesive, apply patch primer, and skim coat the full 870 square feet with 14 bags of Planiprep SC, then remove and dispose of 49 square feet of existing VCT. A toilet in the work area was removed and reset as part of the flooring scope so the new floor could run cleanly beneath it.

Only after the substrate was flat and sound did the 936 square feet of Karndean Opus Natural Walnut go down with the specified adhesive, with 56 pieces of cove base finishing the perimeter — a wood-look floor for a space being prepared for tabletop gaming and collectible-card retail.

Project overview

The goal, materials, and finished scope.

In August 2026, Floors Now completed a 936-square-foot commercial flooring project in Berlin for a space being prepared for tabletop gaming and collectible-card retail use. The old carpet had already been removed, but leftover adhesive remained across much of the exposed concrete. The crew scraped and skim coated 870 square feet, used patch primer and Planiprep SC, removed and disposed of 49 square feet of VCT, coordinated a toilet removal and reset, and installed Karndean Opus Natural Walnut WP326 gluedown luxury vinyl throughout the commercial space. New cove base completed the perimeter.

Project facts

Completed
August 2026
Documented scope
Commercial gluedown luxury vinyl installation
Property type
Commercial Space
Customer type
Business
Rooms
Commercial interior
Flooring
Karndean Opus Natural Walnut WP326 gluedown luxury vinyl plank
Project goal
Prepare the concrete and create a finished wood-look floor for a future tabletop gaming and collectible-card retail space

Project photography

The finished result.

Each image and caption identifies the portion of the verified project that is actually shown.

Karndean Opus Natural Walnut gluedown luxury vinyl installed in an open Berlin commercial interior
View 1.Completed Karndean Opus Natural Walnut flooring after extensive concrete preparation in Berlin.

Scope of work

What we did, step by step.

Extensive adhesive removal and skim coating prepared the concrete for gluedown luxury vinyl.

  1. Scraped leftover carpet adhesive from 870 square feet of concrete after the old carpet had already been removed
  2. Applied patch primer and skim coated 870 square feet using 14 bags of Planiprep SC
  3. Removed and disposed of 49 square feet of existing VCT
  4. Removed and reset one toilet as part of the flooring work
  5. Installed 936 square feet of Karndean Opus Natural Walnut WP326 gluedown luxury vinyl with the specified adhesive
  6. Installed the specified 56 pieces of cove base with cove-base adhesive

Common questions

Questions about this commercial flooring project.

What flooring was chosen for the gaming retail space?

Karndean Opus Natural Walnut WP326 gluedown luxury vinyl plank — a wood look for 936 square feet of a space being prepared for tabletop gaming and collectible-card retail use. The business name and address are withheld for customer privacy.

What is cove base, and why does a commercial floor need it?

It is the finished trim where the floor meets the wall. We installed 56 pieces of cove base with cove-base adhesive around the perimeter, giving the commercial space a clean, finished edge.

What condition was the concrete in before installation?

The old carpet had already been removed before we arrived, but leftover adhesive remained across about 870 square feet of exposed concrete. We scraped the adhesive, applied patch primer, and skim coated the area with Planiprep SC before installing the new floor.

Why is concrete preparation a separate step before gluedown LVP goes down?

Because gluedown flooring bonds directly to the slab, with no underlayment to hide what sits beneath it. Here that meant scraping 870 square feet of adhesive residue, applying patch primer, and skim coating with 14 bags of Planiprep SC — the new floor only performs as well as the surface it is glued to.

Products and planning

Planning a similar flooring project?

Use these resources to compare the materials, preparation, and installation services involved in this project.

Flooring Advice

Go deeper on luxury vinyl.

Focused answers for the questions that need more room than a buyer's guide.

Browse all Flooring Advice

Plan a project like this Berlin installation

Tell us about your rooms, flooring, and project goals.

Share the location, rooms, existing floors, materials you are considering, known preparation needs, and timing. Floors Now will review the details and follow up about the most practical next step.

Step 1 of 2

Project basics

How can we help?

What would you like to do?
What type of project is it?

No measurements or street address needed to get started.

Get a free estimate