Can bedroom carpet and stair carpet be replaced at the same time?
This Newington project replaced the existing carpet in two bedrooms and on the stairs. Stairs usually wear out their carpet long before bedrooms do — every step lands on the same narrow strip of treads, so the pile mats and the padding beneath compresses faster than it does under bedroom furniture and foot traffic. Once that happens on the stairs, the bedrooms rarely look fresh either.
Keeping the same carpet across the bedrooms and stairs also solves a practical problem: color continuity. We installed NRF SP4000 Sandy Beach with new carpet pad across about 690 square feet, moving the furniture and removing and disposing of the old carpet as part of the scope. One material run means no mismatched dye lots between the rooms and the stairs.
The stairs were finished in the waterfall style, where the carpet follows across each tread and drops toward the next riser for a smooth, continuous look. Coordinating the bedrooms and stairs in one visit kept the installation consistent and avoided a second round of furniture moving and disruption.
Project overview
The goal, materials, and finished scope.
In September 2026, Floors Now updated two bedrooms and the staircase in a Newington home with NRF SP4000 Sandy Beach carpet. The crew moved the furniture, removed and disposed of the old carpet, and installed about 690 square feet of new carpet with fresh padding. The stairs were finished in a waterfall style for a smooth, continuous look.
Project facts
Completed
September 2026
Documented scope
Residential carpet replacement
Property type
Residential Home
Rooms
Two bedrooms and stairs
Flooring
NRF SP4000 Sandy Beach carpet with new carpet pad
Project goal
Replace the existing carpet in two bedrooms and on the stairs.
Project photography
The finished result.
Each image and caption identifies the portion of the verified project that is actually shown.
View 1.Bedroom carpet after the September 2026 Newington replacement.
View 2.Carpet installed over the staircase in the Sandy Beach color.
View 3.Carpet across the upstairs landing near the bedrooms.
View 4.Carpet on the upper landing beside the stairs.
Scope of work
What we did, step by step.
NRF SP4000 Sandy Beach carpet across two bedrooms and the stairs.
1Removed and disposed of the existing carpet
2Moved furniture as part of the installation work
3Installed approximately 690 square feet of NRF SP4000 Sandy Beach carpet with new carpet pad
4Installed carpet on the stairs using the waterfall style
Common questions
Questions homeowners ask about this kind of project.
Can the stairs and bedrooms use the same carpet?
Yes. This project used NRF SP4000 Sandy Beach with new carpet pad across two bedrooms and the stairs — about 690 square feet total — so the rooms and stairs match exactly.
What is waterfall-style stair carpet?
With the waterfall method, the carpet follows across each tread and drops toward the next riser rather than wrapping tightly around the stair nose, giving a smooth, continuous look. We used it on this project's stairs. A bound runner, by contrast, is carpet finished with binding along both edges — the approach we used on a separate Newington stair project.
Do you move furniture for bedroom carpet installations?
Yes. The crew moved the furniture in the two bedrooms as part of this installation, and also removed and disposed of the existing carpet.
Is the old carpet removed and disposed of as part of the job?
Yes. Removing and disposing of the existing carpet was included in this scope before the new carpet and padding went in.
Products and planning
Planning a similar flooring project?
Use these resources to compare the materials, preparation, and installation services involved in this project.
Tell us about your rooms, flooring, and project goals.
Share the location, rooms, existing floors, materials you are considering, known preparation needs, and timing. Floors Now will review the details and follow up about the most practical next step.